The method of balloons puppy is: 1. Prepare the required balloons and inflexify the balloon half. 2, make two bubbles with 7 and 14 cm in length. 3, 14 cm bubbles as rings as ears. 4, make 5 and 10 cm bubbles. 5, 10 cm bubbles make the current limbs. 6, separate 5 and 10 cm bubbles. 7, short body as the body, long -forming ring bubbles as the hind limbs. 8, the end is divided into two foam as a tail. 9. Drawing the eyes, the simple puppy is done.
Fire the balloon and leave a three -inch tail. Continue to blow until the air swells and the tail is about three inches, and then stops blowing and knotting the balloon. M making three basic twists. Starting from the knotting part of the balloon, three basic twists are made, so there are four parts in the balloon. The first part, including balloon knots, will form a dog's nose. It is longer than the other two sections, and these two sections can form dogs' ears. The last paragraph is the longest and will be used to make the body of the dog. The hold these sections with one hand to prevent them from loosen because they have not been locked. twisting the ears together. Use your free hand to grab the ears of the second and third paragraphs and twist them together three times. This locks them. make to make three other basic twists. Make the first twist in a few inches at the lower end of the head to form a neck. Make two folding below the neck to make these two parts equal, which will form legs. Taking the newly folding part with the same hand to prevent them from loosening. twisting the legs together. Turn the part of the legs in the middle of the legs, grab the legs with idle hands, and wrap them around with their necks. Now the legs and neck are locked in place. make to make three other basic twists. This time, the remaining part is divided into four -segment wait. The first paragraph is the body of the dog. The two parts in the second paragraph are the back of the dog, and the last part is the tail. Together with one hand to prevent them from loosening. twisting the hind legs together. Turn the part of the two hind legs, grab the two legs and then twist them three times on the basis of the body to see the balloon shape you complete: it has a knotted nose, short ears, front legs With the hind legs, straight tails.
Preparation: pitch, black mark pen, magic balloon , inflatable the balloon more than half, folded out two bubbles, 7, 14 cm As a puppy's ears , fold two ball bubbles, which are 5, 10 cm 10 cm bubbles to make ring bubbles as forefoot. In the folding 5 or 10 cm bubbles 5 cm bubbles as the body, 10 cm bubbles are made of bubbles as the hind legs Completed
If the landlord, you think my method is difficult to understand, go to jingyan./article/ to see
The method of balloons puppy is:
1. Prepare the required balloons and inflexify the balloon half.
2, make two bubbles with 7 and 14 cm in length.
3, 14 cm bubbles as rings as ears.
4, make 5 and 10 cm bubbles.
5, 10 cm bubbles make the current limbs.
6, separate 5 and 10 cm bubbles.
7, short body as the body, long -forming ring bubbles as the hind limbs.
8, the end is divided into two foam as a tail.
9. Drawing the eyes, the simple puppy is done.
Fire the balloon and leave a three -inch tail. Continue to blow until the air swells and the tail is about three inches, and then stops blowing and knotting the balloon.
M making three basic twists. Starting from the knotting part of the balloon, three basic twists are made, so there are four parts in the balloon. The first part, including balloon knots, will form a dog's nose. It is longer than the other two sections, and these two sections can form dogs' ears. The last paragraph is the longest and will be used to make the body of the dog.
The hold these sections with one hand to prevent them from loosen because they have not been locked.
twisting the ears together. Use your free hand to grab the ears of the second and third paragraphs and twist them together three times. This locks them.
make to make three other basic twists. Make the first twist in a few inches at the lower end of the head to form a neck. Make two folding below the neck to make these two parts equal, which will form legs. Taking the newly folding part with the same hand to prevent them from loosening.
twisting the legs together. Turn the part of the legs in the middle of the legs, grab the legs with idle hands, and wrap them around with their necks. Now the legs and neck are locked in place.
make to make three other basic twists. This time, the remaining part is divided into four -segment wait. The first paragraph is the body of the dog. The two parts in the second paragraph are the back of the dog, and the last part is the tail. Together with one hand to prevent them from loosening.
twisting the hind legs together. Turn the part of the two hind legs, grab the two legs and then twist them three times on the basis of the body to see the balloon shape you complete: it has a knotted nose, short ears, front legs With the hind legs, straight tails.
Preparation: pitch, black mark pen, magic balloon
, inflatable the balloon more than half, folded out two bubbles, 7, 14 cm
As a puppy's ears
, fold two ball bubbles, which are 5, 10 cm
10 cm bubbles to make ring bubbles as forefoot.
In the folding 5 or 10 cm bubbles
5 cm bubbles as the body, 10 cm bubbles are made of bubbles as the hind legs
Completed
If the landlord, you think my method is difficult to understand, go to jingyan./article/ to see
Balloon as a puppy