4 thoughts on “How to fight wool shoes?”

  1. Tools/ingredients: wool, woolen needle.
    1. Prepare the wool and wool needle. From 6 stitches to weaving demonstrations, as shown in the figure below.
    2. Start the knitting needle, and add a needle in the last needle when the last needle is left. Then turn the noodles after weaving the last needle, continue to knit the needle, and add a needle to the last needle left by the last needle, as shown in the figure below.
    3, repeatedly weave until the needle is added to 10 stitches, as shown in the figure below.
    4, then do not reduce the knitting needle, start from the heel to the toes, began to reduce the needle, as shown in the figure below.
    5, the needle reduction method, the last 2 stitches of each row, as shown in the figure below.
    6, there are 6 stitches on the needle to be reduced to the needle. These 6 stitches are used as the toe, and the soles are completed, as shown in the figure below.
    7. Use a needle to pick a needle in each hole on both sides of the toe, pick it on 2 stitches, and start the knitting needle, as shown in the figure below.
    8. Each knitted on the left and right sides of the toe is 2 stitches and a needle, as shown in the figure below.
    9, the height of the shoe gang is woven, as shown in the figure below.
    10, after the shoe is woven, start weaving the shoe tube, weave a needle, and then weave a needle, as shown in the figure below.
    11, the height of the need, 5 and then the needle breaks the line, hide the wire head, and the wool shoes are woven, as shown in the figure below.

  2. Prepare materials: soles, wool, hook needles.
    1. Use colorful needles on the front and back of the slippers, and make a mark on the toe and ends to avoid asymmetric when weaving, as shown in the figure below.
    2. Next to the mark on one side of the toe, start wearing the wool on the pin of the soles, as shown in the figure below.
    3, a short needle hook the needle foot along the soles of the soles, as shown in the figure below.
    4, after a complete lap (purple), start changing the line (green), from the hook toe of the place with a niche to the other side, as shown in the figure below.
    5, then change the line (purple), and the third line of the hook toe should start hooking the fourth row from one shot, as shown in the figure below.
    6. Circulate the hooks according to the above method, as shown in the figure below.
    7. According to the length of your favorite upper, the hook is woven to the position to close the needle, so that the woolen slippers will be hooked, as shown in the figure below.

  3. Tools and materials: wool and woolen needle.
    1. Prepare to woven the sole: first start with 8 stitches for demonstration, and when weaving, the needle should be raised according to the size of the feet.
    2, then start the knitting needle, add a needle to the last needle in this row, then turn over the knitting needle, and then weave to the last shot of the front needle. At this time, there are 10 stitches.
    3. The length of the feet. Then close the needle, and the last 2 stitches as the pins were added to the needle, and there were 8 stitches on the needle.
    4, these 8 stitches are used as the toe, and then the other three sides are picked up with a needle. Open.
    5, then start the shoe gang, and reduce one needle on each circle to the left and right sides of the toe.
    6, next to the shoe tube. After weaving the length of the shoe gang, start to change the needle method, weave a needle on the needle, and one needle.
    7, the needle is tied to the need for length.
    8. After weaving, sort it out, and decorate it with a small flower.
    9, so wool shoes are woven.

  4. Pay content for time limit to check for freenAnswer 1. First of all, 36 stitches with black lines, and then weaving 4 rows of flat needles, when weaving to the edge of the shoe, you need to change the red line, then weave 4 back and forth, then change the black line, weave 4, and weave 4. Back and forth, replace it with 4 laps. 2. Then you can add needles, weave 16 lines of red line, when weaved to the soles, then replace it with a black line, add 1 needle after 1 needle, then weave 15 stitches, always weave 17 stitches, the remaining red lines are left, the remaining red line Don't knit, just stay on the needle. 3. Use the black line to continue weaving. The first needle must be picked by the needle, without weaving, starting from the second needle, after weaving a line, it will not be reduced when weaving. In the second line, we must also weave 1 needle and add 1 needle. When weaving the black line, there are only 2 stitches. 4. When weaving to the third line of the black line, continue to weave 1 needle plus and 1 needle. When the black line is left, 2 stitches continue to be woven. A total of 5 returns and forth, and then change the red thread 4 back and forth. Repeat 5 to 5 to to 5 to 7 stitches, change red threads for 4 back and forth. 5. Then use red wire weaving 4 lines, black wire weaving 4 lines, then weaving 4 lines of red wire, and then slowly reduced the needle, belonging to the reverse weaving method. 6. Wait for the second row, then weave 1 needle, then combine 2 to 3 stitches into 1 needle, then weave enough 14 stitches, weave it back, and then add 1 needle and add 2 stitches.n1. First of all, 36 stitches are used to use the black line, and then weave 4 lines of flat needles. When weaving to the edge of the shoe, you must change the red line, weave 4 back and forth, then change the black line , Replace it with 4 laps. 2. Then you can add needles, weave 16 lines of red line, when weaved to the soles, then replace it with a black line, add 1 needle after 1 needle, then weave 15 stitches, always weave 17 stitches, the remaining red lines are left, the remaining red line Don't knit, just stay on the needle. 3. Use the black line to continue weaving. The first needle must be picked by the needle, without weaving, starting from the second needle, after weaving a line, it will not be reduced when weaving. In the second line, we must also weave 1 needle and add 1 needle. When weaving the black line, there are only 2 stitches. 4. When weaving to the third line of the black line, continue to weave 1 needle plus and 1 needle. When the black line is left, 2 stitches continue to be woven. A total of 5 returns and forth, and then change the red thread 4 back and forth. Repeat 5 to 5 to to 5 to 7 stitches, change red threads for 4 back and forth. 5. Then use red wire weaving 4 lines, black wire weaving 4 lines, then weaving 4 lines of red wire, and then slowly reduced the needle, belonging to the reverse weaving method. 6. Wait for the second row, then weave 1 needle, then combine 2 to 3 stitches into 1 needle, then weave enough 14 stitches, weave it back, and then add 1 needle and add 2 stitches.nTrouble give a praisen1 morenBleak

Leave a Reply to Lewis Cancel Reply

Your email address will not be published. Required fields are marked *

Scroll to Top
Scroll to Top